Extreme Networks BlackDiamond 8800 Series - Manual (Page 26)

BlackDiamond 8800 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide 26
Figure 8: G24X I/O Module
The default configuration of the G24X module is as follows. All ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The G24X module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the G24X module, see “I/O Module LEDs” on
page 38 . For information about the SFP modules, see the Extreme Networks Pluggable Interface Modules
Installation Guide.
10G4X I/O Module
The 10G4X I/O module ( Figure 9 ) has four unpopulated XENPAK-based 10 Gigabit Ethernet ports.
Figure 9: 10G4X I/O Module
The default configuration of the 10G4X I/O module is as follows. All ports:
● Are added to the default VLAN as untagged.
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4X I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 10G4X I/O module, see “I/O Module LEDs”
on page 38 . For information about the XENPAK interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
Module status LEDs 1000BASE-X
ports
ASP041A
Module status LEDs 10 Gbs ports
ASP040A