Extreme Networks BlackDiamond 8800 Series - Manual (Page 115)

Initial Management Access
BlackDiamond 8800 Series Switches Hardware Installation Guide 115
5 At the password prompt, press [Return].
The default user name admin has no password assigned to it. When you have successfully logged on
to the system, the command line prompt displays the system name (for example,
BlackDiamond12804> ) in its prompt.
NOTE
For more information about how to assign a specific system name, see the ExtremeXOS 12.1 Concepts Guide.
6 Assign an IP address and subnetwork mask for VLAN default by typing:
configure vlan default ipaddress 123.45.67.8 255.255.255.0
Your changes take effect immediately.
7 Save your configuration changes so that they will be in effect after the next system reboot by typing:
save
The configuration is saved to the configuration database of the MSM modules in the switch.
NOTE
For more information about saving configuration changes, see the ExtremeXOS 12.1 Concepts Guide.
8 When you are finished with these tasks, log out of the switch by typing:
logout