Extreme Networks BlackDiamond 8800 Series - Manual (Page 85)

Initial Management Access
BlackDiamond 8800 Series Switches Hardware Installation Guide 85
CAUTION
Be sure that no copper is visible between the lug and the cable insulation.
4 Crimp the lug onto the cable according to the manufacturer’s specifications.
5 Insert the screws through the lug and into the grounding point on the back of the chassis.
6 Connect the other end of the wire to a known reliable earth ground point at your site.
Initial Management Access
For instructions on accessing the switch for initial management setup, see “Initial Management Access”
on page 114 .