The slot, Figure 74, Figure 74: inserting the option card – Extreme Networks BlackDiamond 8800 Series User Manual
Page 123: Figure 75: securing the option card, Installing an option card in the msm-48c
Installing an Option Card in the MSM-48c
BlackDiamond 8800 Series Switches Hardware Installation Guide
123
Figure 74: Inserting the Option Card
6
Release the hot-swap prevention latch and verify that the option card has engaged the alignment
pins and connector at the back of the card.
7
At the back of the option card, align and finger-tighten the captive retaining screws to secure the
card in place (
).
Figure 75: Securing the Option Card
8
Re-install the MSM-48c, following the instructions in
“Installing a BlackDiamond 8800 Series
Leave the ESD-preventive wrist strap permanently connected to the switch so that it is always available
when you need to touch ESD-sensitive components.
Option c
a
rd
M
S
M4
8
c_h
s
p-l
a
tch
Option c
a
rd
Tighten ret
a
ining
s
crew
s
M
S
M4
8
cOptionC
a
rd
a