Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 79)

W e b S e r v e r I n t e r f a c e 3-47
The Endpoint Details screen provides the following user-activated buttons:
Endpoint Service Details
Clicking the “Service Details” button at the bottom of the Endpoint Table
screen displays the typical Service Details screen. Refer to the Service Details
Screen on page 3-25 for a complete description of this type of screen.
DLCI Details Screen
The Endpoint DLCI Details screen (Figure 3.42) lets you access the
configuration parameters described in the following paragraphs. To bring up
this screen, click on a specific DLCI under the “DLCI” column on the
Endpoint Table screen, or on the “DLCI Details” button on the Endpoint
Details screen.
Figure 3.42 DLCI Details Screen
The unit uses the first three configuration parameters (Protocol Encapsulation,
Proprietary Traffic Type, and Proprietary Offset) displayed on this screen to
gather statistics. For in-band management, “RFC 1490” must be the
encapsulation method.
Button Function
Submit Sets any values that have been changed.
Service Details Opens the Service details screen showing the selected service's
settings.
DLCI Details Displays details of the selected DLCI.
Delete Endpoint Deletes the currently displayed endpoint.