Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 68)

3-36 W A N s u i t e 7 1 0 5
SCADA Details Screen
Click on “SCADA” under the “Type” column on the Services screen to view
the SCADA Details screen (Figure 3.31). This menu gives you access to the
configuration parameters described in the paragraphs below.
Figure 3.31 SCADA Details Screen
Message Size Maximum number of characters to buffer before sending a frame.
Values: 0
−
1024
Default: 256
Idle Character Delay Maximum number of idle character time to wait before sending a frame.
Values: 0
−
65535
Default: 10
Input Terminator Decimal value of the character that terminates a message before sending a
frame.
Values: 0
−
255
Default: 0
Data Direction Data direction that the port will support. If set to “Input,” the port will only
accept incoming data and will not transmit data. If set to “Output,” the port
will ignore any incoming data. If set to “Both,” the port will process all data.
Values: Input, Output, Both
Default: Both
Clear Stats Clears all Frame Relay statistics.
Pair Frame Relay
Statistics Opens another Frame Relay Statistics screen that reverses the
service and the pair so you can view statistics for both sides of
the pair.
Button Function