Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 66)

3-34 W A N s u i t e 7 1 0 5
NOTICE: When a “Submit” command is executed, the Frame Relay link will be
re-initialized with the new parameters, causing a brief interruption in
data transfer.
Clicking the “Frame Relay Statistics” button brings up a table (Figure 3.29) that
reports on the status and condition of LMI parameters and on Receive/Transmit
alarms and thresholds. Alarm threshold levels may be changed by entering a
new threshold value in the appropriate field on the Frame Relay Service Details
screen and clicking the “Submit” button.
Figure 3.29 Frame Relay Port Statistics Screen
Transmit
Frames Number of frames transmitted by the port.
Octets Number of octets transmitted by the port.
Mgmt Frames Number of management frames transmitted by the port.
Mgmt Octets Number of management octets transmitted by the port.
DLCI Table Opens the DLCI Table screen, which displays all the DLCIs
on the current service. Refer to DLCI Table Screen on
page 3-52 for more information.
Clear Alarms Clears all Frame Relay alarms.
Pair Type Details Opens another Frame Relay Service Details screen that
reverses the service and the pair so you can view both sides
of the pair.
Button Function