Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 228)

4-94 W A N s u i t e 7 1 0 5
Figure 4.89 HDLC Monitor Table Screen
Ndx Utilization detector index.
Svc Service to which an HDLC detector is assigned.
Service (bps) Bit rate of the specified service.
Rx High Status Indicates if Rx utilization for the previous second is high.
Rx High Count Number of seconds during past 15 min greater than or equal to the user-
specified Rx high utilization parameter.
Rx High Alm Alarm that reports if Rx high utilization exceeds threshold.
Tx High Status Indicates if Tx utilization for the previous second is high.
Tx High Count Number of seconds (0
−
900) during past 15 min greater than or equal to the
user-specified Tx high utilization parameter.
Tx High Alm Alarm that reports if Tx high utilization exceeds threshold.
Rx End of Day Low
Alarm
Alarm that reports if Rx low utilization drops below threshold.
Tx End of Day Low
Alm
Alarm that reports if Tx low utilization drops below threshold.
HDLC Monitor Details Screen
The HDLC Monitor Details screen (Figure 4.90) lets you specify what are
considered high and low utilization and set alarms that will report if utilization
rises above or falls below specified thresholds.