Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 175)

V T 1 0 0 I n t e r f a c e 4-41
Figure 4.33 SCADA Device List Screen
Select the “SCADA Device Details” prompt to access a menu (Figure 4.34)
that lets you map SCADA devices to endpoints.
Figure 4.34 SCADA Device Details Screen
To delete the Username and Password for a selected PAP Index, delete the
character string displayed in both fields (leaving them blank) and press the
“Esc” key.
IP Service Details Screen
The IP Service Details screen (Figure 4.12), accessed by selecting “IP” from the
column in the IP Service screen, lets you configure the IP parameters
described on page 4-19.
To change any of the available parameters, you must enter new values in the
appropriate field(s) and press the “Esc” key to save your changes.
NOTICE: To use newly established IP parameters, you must “Save and Restart.”
(See "Save and Restart" on page 4-6.)