Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 108)

3-76 W A N s u i t e 7 1 0 5
Destination IP Address Destination IP Address of sent Ping request messages.
Number to Send Number of Ping request messages to send.
Values: 1
−
10,000
Default: 5
Ping Size (Bytes) Number of bytes in a Ping request message.
Values: 4
−
4096 bytes
Default: 64 bytes
Ping Reply Timeout
(sec)
Number of seconds to wait for a reply to a Ping request message.
Values: 1
−
60 s
Default: 1 s
Ping Status Shows the number of pings returned versus the number requested, and
providing minimum, average, and maximum statistics.
The Originate Ping screen provides the following user-activated buttons:
TCP Server
The TCP Server is a general-purpose application that maps arbitrary TCP port
numbers to non-TCP/IP devices that have been assigned an endpoint. (See the
Endpoint Table Screen on page 3-44.)
TCP Server Details Screen
The TCP Server Details screen (Figure 3.69) lets you establish TCP
connections and map them to physical devices that communicate via a
supported interface.
Figure 3.69 TCP Server Details Screen
Button Function
Submit Sets any values that have been changed.
Start Ping Starts sending Ping messages.
Stop Ping Stops sending Ping messages.
Reset Stats Clears all counts activity.