Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 36)

3-4 W A N s u i t e 7 1 0 5
The Unit screen provides the following user-activated buttons:
Maintenance Reset Use this button to access a screen where you can perform a Maintenance
Reset (Figure 3.2Figure 3.2). When you click on the arrow in the pull-down
menu box on the screen, you will have the option to perform a TDM, Packet,
Packet 3, or Packet 4 reset. When you select one of these options, all previous
configurations will be lost and the unit will be set back to the specified
factory default.
Figure 3.2 Maintenance Reset Screen
Save and Restart Use this button to save the current configuration settings and proceed with the
restart as shown in Figure 3.3.
Figure 3.3 Save and Restart Screen
NOTICE: Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit.
Button Function
Submit Sets any values that have been changed. The top “Submit”
button sets any unit parameters changed in the upper section of
the screen, and the lower “Submit” button sets the real-time
clock.
Maintenance Reset Brings up a screen where you can reset unit to its default TDM
or Packet, Packet 3, or Packet 4 configuration.
Save and Restart Saves the current configuration and performs a restart.