Editing the playback starting time, 9–playlist mode – Teac HS-2 User Manual

Page 83

TASCAM HS-2

3 Touch the

ENTER

button to confirm the setting.

TIP

• You can also use the PLAY key and other transport keys

while listening to the audio to find the location, and

then touch the

CURRENT

b button to input that value

here.

• This can also be edited using an externally connected

keyboard on the

EDIT START POINT

screen /

EDIT

END POINT

screen.

Press the keyboard’s ESC key to clear all the values.

Editing the playback starting time

1 Press the HOME key on the front panel to open the

Home screen.

2 Touch a file name or title name button display and

then touch the

ADJUST ENTRY

button in the pull-

down menu to open the

ADJUST ENTRYXXX

screen.

(“

XXX

” is the entry number.)

NOTE

You can also open this screen by touching the

button and then touching the

ADJUST

button in the

pull-up menu when a take is selected on the

ENTRY

list

screen or one of the key assign buttons on the left is

selected on the

ASSIGN

file screen.

3 Touch the

Start TC Fade/Level

tab to display

the screen below.

4 Touch the

EDIT

button to open, and touch the

number buttons on the

EDIT START TC

screen to

change the

Start TC

5 The value shown next to the

Start TC

item is the

playback starting time for the selected entry. Touch

the

EDIT

button for the

START TC

item to open the

EDIT START T/C

screen where you can change the

playback starting time.

Use the

FRAME EDIT

button on the

EDIT START

T/C

screen to set whether or not you will edit the

frame value.

6 Use the number buttons to input the playback start

time on Entry.
• If you begin input without selecting a digit, input

will start from the smallest one.

• To input a specific digit, touch it to make its

background yellow, and then use the number

buttons or the DATA dial to enter two digits at a

time.

• Touch the

CURRENT

b button to copy the current

time code time to the input value.

• Touch the

CLEAR

button to erase all entered values.

7 Touch the

ENTER

button to confirm the setting.

TIP

• You can also use the PLAY key and other transport keys

while listening to the audio to find the location, and

then touch the

CURRENT

b button to input that value

here.

• This can also be edited using an externally connected

keyboard.
Press the keyboard’s ESC key to clear all the values.

9–Playlist mode