Important safety precautions – Teac HS-2 User Manual

Page 2

TASCAM HS-2

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the litera-

ture accompanying the appliance.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclo-

sure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This appliance has a serial number located on the

rear panel. Please record the model number and

serial number and retain them for your records.

Model number

Serial number

TO THE USER

This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user
will be required to correct the interference at his own
expense.

CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC CORPORATION for compliance could
void the user's authority to operate this equipment.

For U.S.A.

In North America use only on 120V supply.

IMPORTANT SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CE Marking Information
a) Applicable electromagnetic environment: E4
b) Peak inrush current: 14 A

8 For European Customers

Disposal of electrical and electronic equipment
(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste

stream via collection facilities designated by the

government or local authorities.

(b) By disposing of electrical and electronic equipment

correctly, you will help save valuable resources and

prevent any potential negative effects on human

health and the environment.

equipment can have serious effec ts on the

environment and human health because of the

presence of hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment (WEEE)

symbol, which shows a wheeled bin that has been

crossed out, indicates that electrical and electronic

equipment must be collected and disposed of

separately from household waste.

(e) Return and collection systems are available to end

users. For more detailed information about the

disposal of old electrical and electronic equipment,

please contact your city office, waste disposal service

or the shop where you purchased the equipment.

WARNING
This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the

user may be required to take adequate measures