Manual locate function, 11–mark and locate functions – Teac HS-2 User Manual

Page 112

112

TASCAM HS-2

Manual locate function

You can directly input a time and locate to it.
Touch the

Manual Locate

button on the Home Screen

to open the

MANUAL LOCATE

screen.

Touch the

FRAME EDIT

button to set whether or not the

frame value can be edited.

FRAME EDIT on

FRAME EDIT off

There are three locate modes as follows.

ABS

: Input an actual time and locate to it.

Input an amount of time to go forward from the

current time.

–

Input an amount of time to go backward from the

current time.

Input the time using the number buttons.
You can also select a number field in the

LOCATE

area and

use the DATA dial to adjust the time.
Touch the

LOCATE

button to locate to that new time and

return to the Home Screen.
Touch the

CLEAR

button to clear all input values.

TIP

This can also be input using an externally connected

keyboard. Press the keyboard’s Enter key to confirm a

setting and its ESC key to clear all the values.

11–Mark and locate functions