Creating a new project, 4–basic operation – Teac HS-2 User Manual

Page 31

TASCAM HS-2

Creating a projec t automatically af ter quick

formatting
If you touch the

QUICK & Create Project

button

instead of the

QUICK

button next to the

FORMAT

item,

a new project will be created after the card is quick-

formatted.
When doing this, however, you cannot change the project

settings. The new project will be created with the same

settings as the current project.
1 Press the MENU key on the front panel to open the

screen. Then, touch the

MEDIA MANAGE

but-

ton on the

screen to open the

MEDIA MANAGE

screen.

2 Touch the

Quick & Create Project

button next

to the

FORMAT

item. The following pop-up window

message appears.

This window shows the project name, session name,

sampling frequency, bit rate and frame type in the

project to be created.

3 Touch the

button in the pop-up window.

Another pop-up window appears to reconfirm.

4 Touch the

button in the pop-up window to start

quick formatting.
After quick formatting completes, a new project is

created automatically.
After the project is created, the Home Screen reopens.

NOTE

Touch the

CANCEL

button in the pop-up window to cancel

formatting and return to the

MEDIA MANAGE

screen.

Creating a new project

1 Press the PROJECT key on the front panel to open

the

PROJECT

screen.

2 Touch the

CREATE PROJECT

button to open the

CREATE PROJECT

screen.

The

CREATE PROJECT

screen has 3 pages.

On the first page, you can set the project name, the

name of the first created session, and the sampling

frequency.
For details about each item, see “Creating new

projects” on page 37.

3 Touch the

button to open the next page.

On this page, you can set the frame type and bit

length.

NOTE

Instead of touching the

button, you can touch the

CREATE PROJECT

button on

CREATE PROJECT

screen

page one (

1/3

at the bottom of the page) to create a

project with the current settings without adjusting them

on the following screens. Touching the

CREATE PROJECT

button on

CREATE PROJECT

page two (

2/3

at the

bottom of the page) has the same effect. In either case,

continue the procedures from step 6.

4 Touch the

button again to open the third

page where you can set the starting time in time-

line mode, for example.
For details about each item, see “Creating new

projects” on page 37.

5 After you complete making settings touch the

CREATE PROJECT

button.

4–Basic operation