Level meters settings (meter setup), 10–internal settings, Output page – Teac HS-2 User Manual

Page 101

TASCAM HS-2

101

OUTPUT page

This shows the output setting and signal route.

METER buttons

Use these buttons to set whether the meter shows the

position before or after the fader.
Touch the button on the left to show the level before the

fader or touch the button on the right to show the level

after the fader on the meter.
Post/Pre Fader buttons
Use these buttons to set whether the headphone output

is from before or after the fader.

Pre Fader button:
Signals before the fader are output for headphones.
Post Fader button (default):
Signals after the fader are output for headphones.

Fader
When RC-HS20PD is connected, the RC-HS20PD fader

level is shown.
When it is not connected, it is fixed at 0dB.

Level meters settings (METER SETUP)

Make level meter settings on this screen.

Metering Point
Set whether the meters show the signal before or after

the faders.

: Meters show the signal before the faders (default).

: Meters show the signal after the faders. In this case,

the button appears light blue.

Ref. Level Line
Touch to turn the reference level line that appears on the

level meter

(default) or

OFF

Reference level line display ON

Over Level
Use this to set the level at which the overload indicator

lights. The peak indication level is this amount below the

maximum level (full scale).
Touch this knob and use the DATA dial to adjust the level.
Options:

–0.20 dB

(default),

–0.17 dB

–0.13 dB

–0.10

–0.06 dB

–0.03 dB

This setting is reflected in the

Audio Over

setting of

the

Auto Marker

item on the

OPTIONS

page of the

REC

SETUP

screen.

Peak Hold Time
Use this to set the peak hold time.
Touch this knob and use the DATA dial to adjust the time.
Options:

0 sec

1 sec

2 sec

(default) and

inf

(hold

forever).
Release Time
Use this to set the release time.
Touch this knob and use the DATA dial to adjust the time.
Options:

Slow

Normal

(default) and

Fast

NOTE

If you press the EXIT/CANCEL (PEAK CLEAR) key when

the Home Screen is open, the peak hold display resets.

10–Internal settings