Teac HS-2 - Manual (Page 11)

TASCAM HS-2
11
2−Names and functions of parts
Front panel
1 POWER switch
Use to turn the power on and off.
This switch has a cover to prevent misoperation.
Open the cover from below to access and operate the
switch.
2 USB connector
By connecting a USB memory, for example, you can
back up DATA from SD cards/CF cards and save files to
the SD cards/CF cards.
By connecting a USB keyboard, you can input the
names of projects and sessions, for example.
By default, the unit is set to use Japanese keyboards,
which have a different layout from US keyboards.
To use a US keyboard, change the setting on the
PREFERENCES
page of the
SYSTEM SETUP
screen. (See
“PREFERENCES page” on page 102.)
NOTE
Do not disconnect USB memory when using it to copy
files. You can connect and disconnect USB memory at all
other times.
You can connect and disconnect USB keyboards at any
time.
This unit is not compatible with USB hubs and other
devices with USB hub functions.
3 SD card/CF card indicators
The indicator for the currently selected card slot lights.
When recording or copying, it blinks rapidly. When no
card is inserted in the current slot, it blinks slowly.
CAUTION
Do not remove a card from the slot when its indicator (SD
card or CF card) is blinking rapidly.
4 SD card/ CF card SLOT
Insert or remove an SD card or CF card from or into this
slot, (See “Inserting and removing SD cards/ CF cards”
on page 24.)
5 HOME key
Press to open the Home Screen.
Press the MENU key while pressing and holding the
HOME key to open the
LOCK SETUP
screen. (See “Lock
function” on page 27.)
Turn the DATA dial when pressing and holding the
HOME key to adjust the brightness of the color display,
the PAUSE, REC, PLAY and ONLINE keys and the JOG
(SHUTTLE), and SD and CF indicators.
Push and turn the DATA dial while pressing and
holding the HOME key to adjust the brightness of only
the color display.
6 MENU key
Press to open the
MENU
screen.
Press the MENU key while pressing and holding the
HOME key to open the
LOCK SETUP
screen. (See “Lock
function” on page 27.)
7 Color display
This 3.5-inch TFT color display has a 320 x 240
resolution.
It shows various types of information and is used for
numerous operations.
8 DATA dial
Turn this to use as a DATA dial and press it to use it as
an ENTER key. When setting parameter values, press
while turning to change them in large increments
(coarse mode).
While displaying the Home Screen in take mode, if the
numbers are not selected on the
NEXT TAKE NAME
screen or using Flash Page number and knob, the take
is selected by turning.
When a pop-up window is open, this works as an
OK
or
CLOSE
button.
Turn the DATA dial when pressing and holding the
HOME key to adjust the brightness of the color display,
the PAUSE, REC, PLAY and ONLINE keys and the JOG
(SHUTTLE), and SD and CF indicators.
Push and turn the DATA dial while pressing and
holding the HOME key to adjust the brightness of only
the color display.