Teac HS-2 - Manual (Page 62)

62
TASCAM HS-2
Undoing the previous edit (UNDO)
You can undo the previous timeline edit.
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Touch the
EDIT
button to display the pull-up menu.
4 Touch the
UNDO
button on the pull-up menu. When
the edit is undone, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
NOTE
• The UNDO
button on the
Fade / Level
pull-up menu
is also available to undo the edit.
• If no editing has been conducted, the UNDO
button is
disabled. The
UNDO
button appears with white letters
when it is possible to undo an edit.
• The timeline mode can store up to 10 most recent
recording/editing operations. You can undo the editing
within the range of the edit records (UNDO) and can
redo the edit (REDO).
However, when the frequency of editing or the region
number increases, the number of operations that can
be stored may decrease.
• The timeline mode edit history will be erased by the
following actions.
• Turning off the power of this unit
• Loading a project, session or AES31 edit information
• Changing the operation mode
Redoing an edit (REDO)
After undoing an edit, you can redo it.
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Touch the
EDIT
button to display the pull-up menu.
4 Touch the
REDO
button on the pull-up menu. When
the edit is redone, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
NOTE
• The REDO
button on the
Fade / Level
pull-up menu
is also available to redo the edit.
• If no edit has been undone, the REDO
button is
disabled. The
REDO
button appears with white letters
when it is possible to redo an edit.
• The timeline mode can store up to 10 most recent
recording/editing operations. You can undo the editing
within the range of the edit records (UNDO) and can
redo the edit (REDO).
However, when the frequency of editing or the region
number increases, the number of operations that can
be stored may decrease.
• The timeline mode edit history will be erased by the
following actions.
• Turning off the power of this unit
• Loading a project or session
• Loading a project, session or AES31 edit information
• Changing the operation mode
7–Timeline mode