Teac HS-2 - Manual (Page 118)

118
TASCAM HS-2
The following is a list of messages that the HS-2 shows in pop-up windows. Refer to this list to learn more about each
message as well as how to respond to them.
The content of the first messages varies depending on the situation. The subsequent messages are listed in alphabetical
order.
Message Details and responses Remarks
MM (vvvvvvvv)
NUM OF PROJECTS : p
USED SIZE : u
FREE SIZE : f
TOTAL SIZE : t
This shows information about the media.
MM = SD or CF
vvvvvvvv = volume level
p : project number
u : capacity used
f : unused capacity
t : total capacity of media
MM DEVICE ERROR The media cannot be recognized. MM = SD, CF, or USB memory
MM Format failed
An error occurred during formatting, and formatting could not
be completed.
MM = SD, CF, or USB memory
MM has no projects.
Please create a project.
The media does not have any project. MM = SD or CF
MM is not available There is no media. MM = SD, CF, or USB memory
MM is not usable You cannot copy. MM = SD, CF, or USB memory
MM MEDIUM ERROR The unit failed to read the media. MM = SD, CF, or USB memory
MM not recommended format
for Recording/Playing.
Format this card?
Since the media was not formatted in this unit, proper re-
cording and playback operations cannot be guaranteed, so it
should be formatted.
MM = SD or CF
This appears when the card is formatted
with a cluster size that is smaller than the
standard of this unit.
MM Read Error An error occurred when reading the card. MM = SD, CF, or USB memory
MM to MM' Copy failed. Copying all of media to media' was not possible.
MM = SD, CF, or USB memory
MM' = SD, CF, or USB memory
MM unrecognized format
Please Format this card.
This media has been formatted in a format other than FAT. For-
mat it for use with this unit.
MM = SD, CF, or USB memory
MM unsupported type
This media does not meet the specifications required by the
system, so it cannot be used.
MM = SD, CF, or USB memory
MM Write Error An error occurred when writing to the card. MM = SD, CF, or USB memory
"nnn" : "eeeeeee"
"tttttttt"
fs/bit/FileMode/NumOfTracks
Entry LENGTH : *h**m**s**f
START T/C : hh: mm: ss.ff
This shows entry information
"nnn" : entry number
"eeeeeeee" : entry name
"tttttttt" : take name
fs : sampling frequency
bit : bit rate
FileMode : MONO or POLY
NumOfTracks : number of tracks
Entry LENGTH : length of entry
START T/C : entry start time code time
"nnn":"NNNNNNNN"
cannot be found
A take with the displayed No. and name cannot be found.
nnn : Take No.
NNNNNNNN : Take name
"pppppppp"
SESSION : n
Fs : f
TIMECODE : t
This shows project information.
"pppppppp" = project name
n : number of sessions
f : sampling frequency
t : time code frame type
"ssssssss"
TAKES : n
Fs : f
TOTAL SIZE : u
TOTAL TIME : t
This shows session information.
"ssssssss" = session name
n : number of take
f : sampling frequency
u : space used
t : total time of all takes
16–Messages