Teac HS-2 - Manual (Page 128)

128
TASCAM HS-2
General
Recording media
SD card / SDHC card
CompactFlash (CF) card
File system
FAT32 (4 GB or more)
FAT16 (2 GB or less)
File format
BWF (Broadcast Wave Format)
WAV (Waveform Audio Format)
Number of channels
2 channels
Quantization bit rate
16-bit, 24-bit
Sampling frequency
44.1/48/88.2/96/176.4/192 kHz
Clock reference
INTERNAL, WORD IN, VIDEO IN, DIGITAL IN
Time code frame
23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Inputs and outputs
Analog audio inputs and outputs
The error for nominal and maximum levels is ±1 dB for all
input and output jacks except the PHONES jack.
ANALOG INPUTS L / R (BALANCED) connectors
Connectors: XLR–3–31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 4.3 kΩ
Nominal input level:
+4 dBu (1.23 Vrms) ±1 dB
(+6 dBu when maximum input level is set to +15dBu)
(+6 dBu when Digital Ref. Level is set to -9 dB)
Maximum input level (selectable):
+15dBu (4.36Vrms) (D.Ref: -9dBFS, A.Input: +6dBu)
+18dBu (6.16Vrms) (D.Ref: -14dBFS, A.Input: +4dBu)
+20dBu (7.75Vrms) (D.Ref: -16dBFS, A.Input: +4dBu)
+22dBu (9.76Vrms) (D.Ref: -18dBFS, A.Input: +4dBu)
+24dBu (12.3Vrms) (D.Ref: -20dBFS, A.Input: +4dBu)
D. Ref: Digital Ref. Level
A. Input: Analog Input Ref. Level
ANALOG INPUTS L / R (UNBALANCED) connectors
Connectors: RCA PIN JACK
Input impedance : 3.9kΩ
Nominal input level : -10dBV (0.316Vrms)±1dB
Maximum input level: +6dBV (2.0Vrms)±1dB
ANALOG OUTPUTS L / R (BALANCED) connectors
Connectors: XLR–3–32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100Ω or less
Nominal output level:
+4 dBu (1.23 Vrms) ±1 dB
(+6 dBu when Digital Ref. Level is set to -9 dB)
Maximum output level (selectable):
+15dBu (4.36Vrms) (D.Ref: -9dBFS, A.Output: +6dBu)
+18dBu (6.16Vrms) (D.Ref: -14dBFS, A.Output: +4dBu)
+20dBu (7.75Vrms) (D.Ref: -16dBFS, A.Output: +4dBu)
+22dBu (9.76Vrms) (D.Ref: -18dBFS, A.Output: +4dBu)
+24dBu (12.3Vrms) (D.Ref: -20dBFS, A.Output: +4dBu)
D.Ref: Digital Ref. Level
A.Output: Analog Out Ref. Level
ANALOG OUTPUTS L / R (UNBALANCED) connectors
Connectors : RCA PIN JACK
Output impedance: 100Ω or less
Nominal input level : -10dBV (0.32Vrms)±1dB
Maximum input level : +6dBV (2.0Vrms)±1dB
PHONES jack
Connector: standard 6.3 mm (1/4”) stereo jack
Maximum output level: 45 mW + 45 mW or more
(THD+N 0.1% or less, into 32 Ω)
17–Specifications