Teac HS-2 - Manual (Page 30)

30
TASCAM HS-2
4–Basic operation
Formatting SD cards/ CF cards
CAUTION
• Formatting an SD card/ CF card erases all the DATA on
it.
• Always format an SD card/ CF card with this unit before
using them in it. If an SD card/ CF card that has been
formatted by another device or PC is used, operation
might be affected.
1 Press the MENU key on the front panel to open the
MENU
screen.
2 Touch the
MEDIA MANAGE
button to open the
MEDIA
MANAGE
screen.
3 Touch the
QUICK
button next to the
SD FORMAT
or
CF FORMAT
item, the following message appears
on the pop-up window.
NOTE
If no card is inserted in that slot, the following pop-up
message appears.
4 Click the
OK
button in the pop-up window. A recon-
firmation pop-up window appears.
5 Touch the
OK
button on the pop-up message.
During formatting, the following pop-up message
appears.
When formatting completes, the following pop-up
message appears.
6 Touch the
OK
button on the pop-up message. The
CREATE PROJECT
screen automatically opens.
7 To make a new project, follow the procedures start-
ing with step 2 in the following “Creating a new
project” section.