Chapter 4, Installation, Gnss receiver – NavCom SF-3040 Rev.F User Manual
Page 94
SF-3040 Product User Guide
– Rev. F
4-92
Chapter 4 ................................. Installation
This chapter provides guidance on SF-3040 hardware
installation for optimum performance.
GNSS Receiver
The SF-3040 housing has a female 5/8-inch BSW
threaded mount (5/8-11 UNC) with a depth of 16 mm
(0.63 inch). Mount the SF-3040 on
a surveyor’s pole,
tripod, mast, or any apparatus that accepts the thread
size.
Do not place the receiver in a
space where it may be exposed to
excessive heat, moisture, or
humidity.
There are no user-serviceable
parts inside the SF-3040 GNSS
receiver. Opening the unit
compromises the environmental
seal and voids the equipment
warranty.
The SF-3040 is not designed for
use on a moving vehicle. If
damage is sustained due to shock
or vibration while mounted on a
moving vehicle or if damage is
sustained due to shear, the
SF-3040 warranty is invalidated.
The SF-3050 is recommended for
use on a moving vehicle and
provides comparable performance
as it is based on the same GNSS
receiver technology.