NavCom SF-3040 Rev.F - Manual (Page 30)

SF-3040 Product User Guide
– Rev. F
1-28

The purchase of a separate appliance cable
may be necessary if the VAC plug
configuration needed is not the standard 2-
prong American connector.
4. Press the front panel On/Off switch to turn on the
SF-3040. All front panel LEDs illuminate for a
period of 3 to 5 seconds during power-up. The
Power/GNSS Status LEDs change from
red
(starting up) to green (power is on). (Refer to
Figure 4).
Figure 4: Indicator Panel
Save Folder/Files to PC

The SF-3040 Product Configuration
USB flash drive includes the following:

Root Directory: Software Options File
and StarFire License (if purchased)

NavCom Folder: Includes these sub-
folders: Firmware, Marketing Materials,
Utilities, User Guides, and User Profiles
1. Plug the SF-3040 Product Configuration USB
flash drive into the PC.
All indicator
panel LEDs
change from
red to green
when power is
ON.