NavCom SF-3040 Rev.F - Manual (Page 85)

SF-3040 Product User Guide
– Rev. F
3-83
4. Close the chamber door and press until it is
securely closed (as verified by the latch click).

The receiver will support a SD card with
a maximum of 16GB (not included).
Logging Data to the Removable SD Card
Schedule the desired messages to log using the
[OUTPUT] command, with a port designation of
“FH1”. Refer to the Sapphire Technical Reference
Manual for detailed instructions.
On the Input Terminal, type the appropriate
commands (refer to Table 10).
When using the logging functions, allow a few
seconds between actions for the processor to
execute and the SD card to respond.
Table 10: Data Logging Input Commands
Command Operation
[LOGFILE]A:
Displays the current logging status of
drive A (SD card): ready, running
1
,
stopped, or paused
[LOGFILE]A:,
START
2
Starts file logging on drive A (SD
card), if logging has not been started
[LOGFILE]A:,
FORCESTART
Forces file logging on drive A (SD
card) and ignores previous
CHKDSK.SD file state; overwrites
CHKDSK.SD file
[LOGFILE]A:,
PAUSE Pauses file logging on drive A (SD
card)
[LOGFILE]A:,
STOP
Stops file logging on drive A (SD
card) if file logging is running or
paused
[LOGFILE]A:,
RESUME Resumes file logging on drive A (SD
card) if file logging is paused