NavCom SF-3040 Rev.F - Manual (Page 26)

SF-3040 Product User Guide
– Rev. F
1-24
SF-3040 Product Overview
The robust, lightweight, versatile SF-3040 is
NavCom’s latest addition to its family of
GPS/GLONASS/StarFire Network-capable satellite
receivers.
A basic SF-3040 software package, plus three distinct
software option offerings,
provide today’s surveyor
with everything needed:

Basic Software: L1/L2, G1 (G2 or L5), StarFire
Ready

Option: L1/L2, G1 (G2 or L5), StarFire Ready plus
RTK, including Network RTK

Option: L1/L2, G1 (G2 or L5), StarFire Ready plus
RTK, including Network RTK, and RTK Extend

Option: Upgrade from 5Hz to 10Hz
measurements and position
Product Configuration Files
All of the files needed to set up the ordered
configuration of the SF-3040 are included on the
SF-3040 Product Configuration USB Thumb Drive (PN
82-043000-0001). The main product configuration files
are as follows:

Firmware (*.s19): the most current firmware

Software Options (*.opt): The options enable the
functionality of the SF-3040. Software Options
may be purchased individually.

StarFire License (*.lic): The SF-3040 is hardware-
ready for StarFire. The StarFire License and the
StarFire Software Option are required to enable
the StarFire Subscription Service.