Sf-3040 antenna – NavCom SF-3040 Rev.F User Manual
Page 63
SF-3040 Product User Guide
– Rev. F
2-61
Bluetooth
The SF-3040 GNSS receiver is Bluetooth-capable.
The Bluetooth module permits cable-less operation
between the receiver and a Class 2 Bluetooth-
equipped controller, with less than 0.2% data loss.
Wireless connectivity is provided within a range of 5
m (16 ft) once a connection is established, and a data
rate of 230.4 Kbps is supported, 10 Hz maximum.
The initial paring sequence must be conducted within
2m (6ft) of the SF-3040. The Bluetooth interface
allows interleaved RTK data from a data collector
GSM radio modem and SF-3040 data positioning
(i.e., two communication links on one port). Refer to
the [PACKB] command in the Sapphire Technical
Reference Manual. The Bluetooth module contains
Bluetooth-certified components and is FCC and CE
certified. Communications performance is dependent
on the user-supplied Bluetooth device.
Refer to Bluetooth Communications Setup for setup
instructions via the supplied NavCom software utility,
StarUtil 3000.
SF-3040 Antenna
The SF-3040 all-in-one housing incorporates
NavC
om’s compact GNSS antenna (refer to Figure
32), with excellent tracking performance and a stable
phase center. The integrated antenna tracks L1, L2,
L2C, L5, G1, G2,
and StarFire™ signals. The
for this product are
available from the National Geodetic Survey (NGS)
calibration table hyperlinked to this text.