NavCom SF-3040 Rev.F - Manual (Page 51)

SF-3040 Product User Guide
– Rev. F
1-49

Predefined user profiles are available in the
Navcom\User Profiles folder saved on the PC
from the SF-3040 Product Configuration USB
Flash Drive.
Enable or Disable Receiver Tracking
and/or Use of Select Signals and
Frequencies
Receiver tracking of various signals and frequencies
can be enabled or disabled.
Refer to the [TRACKINGMODE] and
[NAVMEASUSE] commands in the Sapphire
Technical Reference Manual for detailed instructions
on enabling and disabling the tracking of and receiver
use of various signals and frequencies. Also refer to
the StarUtil 3000 User Guide.
These commands are used primarily
for engineering experiments or
receiver testing. They are not
recommended for use in other
applications.