NavCom SF-3040 Rev.F - Manual (Page 76)

SF-3040 Product User Guide
– Rev. F
3-74
Table 7: Pin Assignments
– COM2
Supplied USB Device Cable
The USB Device Cable P/N 96-212169-01 is the
supplied 6ft (1.83m) data cable fitted with a LEMO
plug type and a USB A plug type, used to connect as
Device directly to a USB 2.0 connector. The pin
assignments are provided below.
Figure 41: USB Device Cable P/N 96-212169-01
(Supplied)
The COM 1 Serial cable P/N 96-212170-01 is an
optional 6ft (1.83 m) data cable that can be plugged
directly into the COM1 port and used as an adjunct to
the USB Device Cable.
COM1 - USB is the only USB-
compliant port.
DB9
Pin #
LEMO
Pin #
Pin Name Pin Function
2 1 COM2 TDX RS-232 Serial port data from PIOB
3 2 COM2 RDX RS-232 Serial port data to PIOB
5 3 GROUND Ground
8 4 COM2 RTS RS-232 Serial port flow control from
PIOB
7 5 COM2 CTS RS-232 Serial port flow control to
PIOB
9 6 COM2 RING RS-232 Ring signal to PIOB