Party controller configuration settings – NavCom SF-3040 Rev.F User Manual

Page 114

Text mode
Original mode

SF-3040 Product User Guide

– Rev. F

5-112

Refer to the [NAVMEASUSE] command in the
Sapphire Technical Reference Manual for detailed
instructions on enabling and disabling navigation
signals and frequencies. Also refer to the StarUtil
3000 User Guide.

This command is used primarily for engineering
experiments or receiver testing. It is not
recommended for use in other applications.

Party Controller Configuration Settings



Refer to the 3

party controller solution

manual/user guide if your
SF-3040 GNSS receiver is part of an
integrated solution

This manual is related to the following products:

SF-3040 Rev.E SF-3040 Rev.A SF-3040 Rev.B SF-3040 Rev.C