NavCom SF-3040 Rev.F - Manual (Page 48)

SF-3040 Product User Guide
– Rev. F
1-46
3. Click the Retrieve Settings From the Receiver
button to retrieve the currently set navigation
modes from the receiver.
4. Select the ON radio button next to StarFire if
StarFire is not enabled.
5. Click the Apply Changes to the Receiver button to
enable StarFire navigation. Then click Close.
6. Select StarFire License in the File Upload window
on the Receiver Options tab (refer to Figure 28).
Figure 28: StarFire License
7. Click .
8. Browse to NavCom\StarFire License on the PC.
The StarFire License file extension is *.lic.
9. Select the StarFire License file. The path to the
file appears in the upload field (see Figure 28).
10. Click the Upload button. At the end of the upload,
a confirmation box opens. Click OK.

The Input Terminal window displays the
outcome of the upload (refer to Figure 29). In
the example below, the upload is successful.
Refer to the Sapphire Technical Reference
Manual for detailed information on the
INPUTSFLICENSE command (see Related
Documents in the fore-matter).