NavCom SF-3040 Rev.F - Manual (Page 113)

SF-3040 Product User Guide
– Rev. F
5-111
Table 18: StarFire Satellites v.3.0.12.0 and Later
Network Satellite ID Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
643 143.5E PAC-W Auckland
525 25E IND-W Burum
Net 2
678 178E POR Santa Paula
564 64E IND-E Perth
446 54W AOR-W Southbury
484 15.W AOR-E Southbury
Enable or Disable Receiver Tracking
and/or Use of Select Signals and
Frequencies
Receiver tracking of various signals and frequencies
can be enabled or disabled.
Refer to the [TRACKINGMODE] and
[NAVMEASUSE] commands in the Sapphire
Technical Reference Manual for detailed instructions
on enabling and disabling the tracking of and receiver
use of various signals and frequencies. Also refer to
the StarUtil 3000 User Guide.

These commands are used primarily for
engineering experiments or receiver
testing. They are not recommended for
use in other applications.
Enable or Disable Receiver Use of
Signals and Frequencies for Navigation
Receiver use of various signals and frequencies for
navigation can be enabled or disabled.