NavCom SF-3040 Rev.F - Manual (Page 162)

SF-3040 Product User Guide
– Rev. F
D-160
Configure the NTRIP Server
Perform these steps:
1. Configure the SF-3040 to send corrections to the
caster via the modem.
2. Connect to the caster:
[NTRIPSERVER]CONNECT
3. Set the base position (use the surveyed
coordinates:
[REFSTNPOS] 33,30,22.649,-118,20,33.123, 65.89
4. Set RTKMODE to use the NTRIP virtual port as
the port for sending the corrections:
[RTKMODE]BASERTCM1004,,1,NTRIP,STATIC,AUTO

BASERTCM1004 indicates the type of
corrections to send.
5. Enter the following command to disconnect from
the caster:
[NTRIPSERVER]DISCONNECT
Refer to the Sapphire Technical Reference Manual
for detailed instructions on the [ECHODGPSB],
[MODEMCONFIG], [NTRIPSERVER],
[NTRIPCLIENT], [OUTPUT], and [RTKMODE]
commands.
Configure the NTRIP Client
Perform these steps:
1. Configure the SF-3040 to receive corrections from
the caster via the modem.
2. Connect to the caster:
[NTRIPCLIENT]CONNECT