NavCom SF-3040 Rev.F - Manual (Page 134)

SF-3040 Product User Guide
– Rev. F
8-132
Transport
Utilize all original packaging when transporting via
rail, ship, or air.
Maintenance
The NavCom equipment may be cleaned using a new
lint free cloth moistened with mild soap. Do not use
pure alcohol on stenciled areas of the case as this will
remove the stenciled labels.
Connectors must be inspected, and if necessary,
cleaned before use. Always use the provided
connector protective caps to minimize moisture and
dirt ingress.
Inspect cables regularly for kinks and cuts as these
may cause interference and equipment failure.
Damp equipment must be dried at a temperature less
than +40

C (104

F), but greater than 5

C (41

F) at
the earliest opportunity.
External Power Source
An external power cable (optional) may be used to
connect the SF-3040. The power cable must be
connected to the chosen external power solution in
accordance with the instructions in Chapter 3,
Electrical Power It is important that the external
power source allow sufficient current draw for proper
operation. Insufficient supplied current will cause
damage to your external power source.
If your chosen external power source is a disposable
battery, dispose of the battery in accordance with
your local regulations.