NavCom SF-3040 Rev.F - Manual (Page 17)

SF-3040 Product User Guide
– Rev. F
xv
Chapter 5: Added RapidRecovery
feature
Chapter 6: Added two notes regarding
charging batteries 12 hours prior
to use.
Appendix A: Added RapidRecovery
specs
Added note regarding 16GB SD card.
Added note disclaiming UHF range
from baseline lengths
Rev. D (Nov 2012) Chapter 2: Added definition for DTM in
Standard and Proprietary sections
under NMEA-0183. Added
description of StarFire Over IP.
Added reference to ITRF-2008 datum.
Chapter 5: Added note under NMEA
messages that in software version
3.2.7 and greater, the NMEADTM
will change at the same rate as
the fastest NMEA message
scheduled by user.
Appendix A: Added DTM to the list of
standard NMEA-0183 data strings.
Added note regarding message
scheduling. Added note on
hardware altitude restriction.
Added correction to frequency
operation under Measurement
Performance. Added StarFire
Over IP in features.
Removed all references to Galileo, E1
and E5A.
Updated StarFire Satellite list and
graphic.
Rev. C (Dec 2011) Chapter 2, SF-3040 Antennae, added
a new link for the antennae
calibration values
Corrected the LEMO 7-Pin USB
Device Cable and LEMO 6-Pin
COM2 Serial Cable part numbers