NavCom SF-3040 Rev.F - Manual (Page 81)

SF-3040 Product User Guide
– Rev. F
3-79
Figure 44: Bluetooth Properties
9. Click OK on the Bluetooth Properties dialog box.
10. Open StarUtil 3000 on the PC.
11. Click the Connections button on the Shortcut bar
to open the Port Configuration dialog box (refer to
Figure 45).

The Bluetooth module can be in two
modes: Command Mode and Data Mode.
When in Data Mode, the module has an
active data connection with a connected
device; it does not receive commands
because commands would be interpreted
as data that need to be passed to the
connecting device.

Turning on Bluetooth is associated with a
software reset of the Bluetooth firmware,
so the system returns the same output as
when the [SHUTDOWN]REBOOT
command is issued (see details on the use
of the [SHUTDOWN] command in the
Sapphire Technical Reference Manual).
When Bluetooth is ON, another in-range