NavCom SF-3040 Rev.F - Manual (Page 129)

SF-3040 Product User Guide
– Rev. F
7-127
which the search for the actual data
transfer signal is active.

Do not install the radio modem on a
strongly vibrating surface. Suitable
dampening and /or isolation materials
should be used in cases where the
installation surface will be subjected to
vibration.
Priority RX/TX
The radio priority is set to TX.
Forward Error Correction (FEC) and Error
Checking
FEC is disabled and unavailable in the SF-3040.
Installing the Radio Modem
Follow these steps to install the radio modem in the
SF-3040 radio modem chamber:
4. To open the radio modem chamber (located on
the right-hand side of the SF-3040 as you hold the
receiver with the front facing toward you), press
downward on the protruding part of the black
button (refer to Figure 56).