NavCom SF-3040 Rev.F - Manual (Page 50)

SF-3040 Product User Guide
– Rev. F
1-48
Figure 31: Nav Mode: StarFire

The Nav Mode: StarFire Dual:GNSS: 3D: Dual
freq in Figure 31 indicates that the receiver is
navigating in StarFire dual frequency with a
3D position fix, which is very accurate.
Factory Default User Profile
Further configuration is not necessary for this initial
use of the SF-3040. The receiver is preconfigured
with a factory default user profile that includes
settings for the various port assignments/parameters,
navigation parameters, and output message lists.

If the SF-3040 does not function
properly, refer to these online tools:

Troubleshooting Guides

User Manuals
Contact the authorized dealer or NavCom
Customer Support (refer to the beginning of
this chapter for contact information).
Upload a User Profile (optional)
If desired, replace the factory default user profile with
a predefined profile, or create a new profile. Refer to
the StarUtil 3000 User Guide for detailed instructions.