Setpoint flags – Measurement Computing Data Acquisition Systems rev.10.4 User Manual

Page 93

Counter Channel Flags (DaqBook/2000 Series; 1000, 2000, 3000 Series DaqBoards; DaqLab/2000 Series,
DaqScan/2000 Series and cPCI DaqBoard/2000c Series,WaveBook/516; WBK17)
DafCtr16

Channel is the 16-bit Counter

Counter Channels (0-3)

Note 1

DafCtr32Low

Channel is the Lower 16 bits of the 32-bit Counter

32-bit Counter Low Word (0,2)

Note 1

DafCtr32High

Channel is the Higher 16 bits of the 32-bit Counter

32-bit Counter High Word (1,3)

Note 1

Note 1: The channel numbers provided for “Counter Channel Flags,” apply to the DaqBook/2000 Series,

DaqLab/2000 Series, DaqScan/2000 Series; “1000, 2000, 3000 Series DaqBoards;” and
cPCI DaqBoard/2000c Series products only.

WBK17 Digital Output Port Flags

DafDigital8

Digital Output Port (Byte)

Reading of Digital Output

DafDigital16

Digital Output Port and Detector (Byte) << 8

Reading of Digital Output

SSH Hold/Sample Flag - For Internal Use Only

DafSSHSample

Internal use only

N/A

DafSSHHold

Internal use only

N/A

Sampling Interval Control (Applies to the following Series Devices: /3000, /2000, and DaqBoard/1000)

DafSettle1us

Allow 1

µs sampling interval (3000 Series Only)

DafSettle1us

applies only to valid Analog

Channels on 3000 Series devices.

In order to obtain the maximum sampling rate for 3000 Series devices,

DafSettle1us

must be used!

DafSettle5us

Allow 5

µs sampling interval

Any valid Analog, Digital, or Counter Channel

DafSettle10u

Allow 10

µs sampling interval

Any valid Analog, Digital or Counter Channel

DafSettle1ms

Allow 1000us (1ms) sampling interval

For use with DBK90 Channels

Clear or shift the least significant nibble (DaqBook/1xx,DaqBoard/1xx)

DafIgnoreLSNibble

Ignore the least significant nibble

Any valid Analog, Digital, or Counter Channel

DafClearLSNibble

Clear the least significant nibble

Any valid Analog, Digital, or Counter Channel

DafShiftLSNibble

Shift the least significant nibble

Any valid Analog, Digital, or Counter Channel

Thermocouple Type Connected to Input

DafTcTypeNone

No Thermocouple