Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 348)

Parameter Type Definitions
gateCtrl-(Daq9513GatingControl)
Definition Description
DgcNoGating Gating disabled
DgcHighTCNM1 Active level high of TC toggled output of previous (N-1) counter
DgcHighLevelGateNP1 Active level high of gate next (N+1) counter
DgcHighLevelGateNM1 Active level high of gate previous (N-1) counter
DgcHighLevelGateN Active level high of gate of selected (N) counter
DgcLowLevelGateN Active level low of gate of selected (N) counter
DgcHighEdgeGateN Active rising edge of gate of selected (N) counter
DgcLowEdgeGateN Active falling of gate of selected (N) counter
cntSource-(Daq9513CountSource)
Definition Description
DcsTcnM1* TC toggled output of previous (N-1) counter
DcsSrc1 Counter 1 input (pin36 of P3)
DcsSrc2 Counter 2 input (pin19 of P3)
DcsSrc3 Counter 3 input (pin17 of P3)
DcsSrc4 Counter 4 input (pin15 of P3)
DcsSrc5 Counter 5 input (pin13 of P3)
DcsGate1 Counter 1 gate (pin37 of P3)
DcsGate2 Counter 2 gate (pin18 of P3)
DcsGate3 Counter 3 gate (pin16 of P3)
DcsGate4 Counter 4 gate (pin14 of P3)
DcsGate5** Counter 5 gate (pin12 of P3)
DcsF1** Onboard 1 MHz Clock
DcsF2** Onboard 100 kHz Clock
DcsF3** Onboard 10 kHz Clock
DcsF4** Onboard 1 kHz Clock
DcsF5** Onboard 100 Hz Clock
*invalid with daq9513SetMasterMode or daq9513RdFreq
**invalid with daq9513RdFreq
outputCtrl-(Daq9513OutputControl)
Definition Description
DocInactiveLow Inactive – Always low
DocHighTermCntPulse High impulse on terminal count
DocTCToggled Toggled on terminal count
DocInactiveHighImp Inactive w/ high impedance
DocLowTermCntPulse Low impulse on terminal count
Returns
DerrInvCtrNum Invalid channel
DerrInvGateCtrl Invalid gate
DerrInvCntSource Invalid source
DerrInvOutputCtrl Invalid output
DerrNotCapable No 9513 available
DerrNoError No error
For more details on error messages, please refer to the Daq Error Table.
D-8 9513 Counter-Timer 938295 Programmer’s Manual