Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 297)

Programmer’s Manual
908594
Daq API Command Reference 4.6-19
Option Type and Value Definitions Continued--DaqOptionType
WBK17 Options (continued)
Option Type (optionType) Description
Option Value
(optionValue)
Description
DcovWbk17ModeMaskGatingOff
DcotWbk17MeasurementMode
(continued)
Enumeration with
Bit-Masking.
The options can be
combined.
DcovWbk17ModeMaskGatingOn
Gating can be selected On or
Off. When “On”, the
counter is enabled when the
mapped channel to gate
the counter is high. When
the mapped channel is low,
the counter is disabled (but
holds the count value).
Option Type and Value Definitions Continued--DaqOptionType
WBK18 Options
Option Type (optionType) Description
Option Value
(optionValue)
Description
DcovWbk18LowPassBypass Bypass the Low Pass Filter
for the specified WBK18
Channel
DcovWbk18LowPass_2_Pole Set the Low Pass Filter to 2-
Pole roll off for the specified
channel
DcotWbk18LowPassMode Configure Low Pass
input filter for Bypass,
2-Pole or 8-Pole on a
WBK18
DcovWbk18LowPass_8_Pole Sets the Low Pass Filter to 8-
Pole roll off for the specified
channel
DcovWbk18LPF_Cutoff_10Hz Sets the Low Pass input filter
to 10Hz for the specified
channel
DcovWbk18LPF_Cutoff_20Hz Sets the Low Pass input filter
to 20Hz for the specified
channel
DcovWbk18LPF_Cutoff_50Hz Sets the Low Pass input filter
to 50Hz for the specified
channel
DcovWbk18LPF_Cutoff_100Hz Sets the Low Pass input filter
to 100Hz for the specified
channel
DcovWbk18LPF_Cutoff_200Hz Sets the Low Pass input filter
to 200Hz for the specified
channel
DcovWbk18LPF_Cutoff_500Hz Sets the Low Pass input filter
to 500Hz for the specified
channel
DcovWbk18LPF_Cutoff_1000Hz Sets the Low Pass input filter
to 1000Hz for the specified
channel
DcovWbk18LPF_Cutoff_2000Hz Sets the Low Pass input filter
to 2000Hz for the specified
channel
DcovWbk18LPF_Cutoff_5000Hz Sets the Low Pass input filter
to 5000Hz for the specified
channel
DcovWbk18LPF_Cutoff_10000Hz Sets the Low Pass input filter
to 10000Hz for the specified
channel
DcovWbk18LPF_Cutoff_20000Hz Sets the Low Pass input filter
to 20000Hz for the specified
channel
DcotWbk18LowPassCutOff Sets the Low Pass input
filter cutoff frequency
for 2 pole or 8 pole
mode
DcovWbk18LPF_Cutoff_50000Hz Sets the Low Pass input filter
to 50000Hz for the specified
channel