beautypg.com

Measurement Computing Data Acquisition Systems rev.10.4 User Manual

Page 296

background image

4.6-18 Daq API Command Reference

908594

Programmer’s

Manual


Option Type and Value Definitions Continued--DaqOptionType

WBK17 Options

(continued)

Option Type

(optionType)

Description

Option Value

(optionValue)

Description

DcovWbk17Mode_Pulsewidth

Pulsewidth Mode

DcotWbk17PulseWidth_MeasChan

Selects to measure input
channel’s pulsewidth.

DcotWbk17PulseWidth_MeasMap

Selects to measure the
mapped channel’s
pulsewidth.

DcovWbk17ModeMask_16Bit

Selects 16-Bit counter.

DcovWbk17ModeMask_32Bit

Selects 32-Bit counter.

DcovWbk17ModeMaskGatingOff

DcotWbk17MeasurementMode
(continued)

Enumeration with

Bit-Masking.


The options can be

combined.

DcovWbk17ModeMaskGatingOn

Gating can be selected On or
Off. When “On”, the
counter is enabled when the
mapped channel to gate
the counter
is high. When
the mapped channel is low,
the counter is disabled (but
holds the count value).

DcovWbk17Mode_Timing

Timing Mode

DcovWbk17ModeMask_16Bit

Selects 16-Bit counter.

DcovWbk17ModeMask_32Bit

Selects 32-Bit counter.

DcovWbk17ModeMaskGatingOff

DcotWbk17MeasurementMode
(continued)

Enumeration with

Bit-Masking.


The options can be

combined.

DcovWbk17ModeMaskGatingOn

Gating can be selected On or
Off. When “On”, the
counter is enabled when the
mapped channel to gate
the counter
is high. When
the mapped channel is low,
the counter is disabled (but
holds the count value).

DcovWbk17Mode_Encoder

Encoder Mode

DcovWbk17Encoder_1X

DcovWbk17Encoder_2X

DcovWbk17Encoder_4X

Determines the encoder
measurement mode: 1X,
2X, or 4X.

DcovWbk17Encoder_LatchOnSOS

Selects start of scan.
Latches the counter outputs
at the beginning of every
scan.

DcovWbk17Encoder_LatchOnZ

Selects the Encoder Z
mapped signal to latch the
counter outputs. This allows
the user to know the exact
counter value when an edge
is present on another
channel.

DcovWbk17Encoder_ClearOnZ_Off

DcovWbk17Encoder_ClearOnZ_On

Selects “clear on Z” On or
Off. When On, the encoder
Z is referenced to clear the
counter. The counter is
cleared on the rising edge of
the mapped (Z) channel.

DcovWbk17ModeMask_16Bit

Selects 16-Bit counter.

DcotWbk17MeasurementMode
(continued)

Enumeration with

Bit-Masking.


The options can be

combined.

DcovWbk17ModeMask_32Bit

Selects 32-Bit counter.