Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 286)

4.6-8 Daq API Command Reference
908594
Programmer’s Manual
Option Type and Value Definitions Continued--DaqOptionType
3000 Series Device Options (continued)
Option Type
(optionType)
Option Value
(optionValue)
Description
DcotCounterEnhMeasurementMode (continued)
DcovCounterEnhMode_Period Period Mode
DcovCounterEnhPeriod_X1
DcovCounterEnhPeriod_X10
DcovCounterEnhPeriod_X100
DcovCounterEnhPeriod_X1000
Used to select the number of periods to time, per
measurement. Choices are:
1, 10, 100, or 1000
DcovCounterEnhPeriod_MeasChan Selects to measure input channel’s period.
DcovCounterEnhPeriod_MeasMap
Selects to measure the mapped channel’s period.
DcovCounterEnhModeMask_16Bit Selects 16-Bit counter.
DcovCounterEnhModeMask_32Bit Selects 32-Bit counter.
DcovCounterEnhModeMaskGatingOff
DcovCounterEnhModeMaskGatingOn
Gating can be selected On or Off. When “On”, the
counter is enabled when the mapped channel to gate the
counter is high. When the mapped channel is low, the
counter is disabled (but holds the count value).
DcovCounterEnhMode_PulseWidth Pulsewidth Mode
DcovCounterEnhPulseWidth_MeasChan Selects to measure input channel’s pulsewidth.
DcovCounterEnhPulseWidth_MeasMap Selects to measure the mapped channel’s pulsewidth.
DcovCounterEnhModeMask_16Bit Selects 16-Bit counter.
DcovCounterEnhModeMask_32Bit Selects 32-Bit counter.
DcovCounterEnhModeMaskGatingOff
DcovCounterEnhModeMaskGatingOn
Gating can be selected On or Off. When “On”, the
counter is enabled when the mapped channel to gate the
counter is high. When the mapped channel is low, the
counter is disabled (but holds the count value).
DcovCounterEnhMode_Timing Timing Mode
DcovCounterEnhModeMask_16Bit Selects 16-Bit counter.
DcovCounterEnhModeMask_32Bit Selects 32-Bit counter.
DcovCounterEnhModeMaskGatingOff
Enumeration
with Bit-
Masking.
The options can
be combined.
DcovCounterEnhModeMaskGatingOn
Gating can be selected On or Off. When “On”, the
counter is enabled when the mapped channel to gate the
counter is high. When the mapped channel is low, the
counter is disabled (but holds the count value).
DcotCounterEnhMeasurementMode (continued)