Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 122)

daqAdcTransferStart
Also See: daqAdcTransferSetBuffer,
daqAdcTransferGetStat, daqAdcTransferStop
Format
daqAdcTransferStart(handle)
Purpose
daqAdcTransferStart initiates an ADC acquisition transfer.
Parameter Summary
Parameter Type Description
handle DaqHandleT Handle to the device for which to initiate an ADC transfer
Parameter Values
handle: obtained from the daqOpen function
Returns
DerrNoError No error
Function Usage
The transfer will be performed under the current active acquisition. If no acquisition is currently active, the
transfer will not initiate until an acquisition becomes active (via the daqAdcArm function). The transfer will
be characterized by the current settings for the transfer buffer. The transfer buffer is configured via the
daqAdcTransferSetBuffer
function.--This buffer configuration must be done before calling the
daqAdcTransferStart function.
Prototypes
C/C++
daqAdcTransferStart(DaqHandleT handle);
Visual BASIC
VBdaqAdcTransferStart&(ByVal handle&)
Program References
DAQADCEX01.CPP, DAQADCEX02.CPP, DAQADCEX03.CPP, DAQADCEX04.CPP,
DAQADCEX05.CPP, DAQADCEX06.CPP, DAQADCEX07.CPP, DBK04EX.CPP, DBK07EX.CPP,
DBK08EX.CPP, DBK09EX.CPP, DBK12_13EX.CPP, DBK15EX.CPP, DBK16EX.CPP,
DBK17EX.CPP, DBK18EX.CPP, DBK19EX.CPP, DBK42EX.CPP, DBK43EX.CPP,
DBK44EX.CPP, DBK45EX.CPP, DBK50EX.CPP, DBK51EX.CPP, DBK52EX.CPP,
DBK53_54EX.CPP, DAQEX.FRM (VB)
4.2-66 Daq API Command Reference 988594 Programmer’s Manual