Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 252)

4.5-22 Daq API Command Reference
908794
Programmer’s Manual
DdiChSubTypeInfo
Value Returned
DaqSubTypeDefault Default Sub type
DaqSubTypeDaqBook2000A DaqBook/2000A or DaqBook/2000X
DaqSubTypeDaqBook2000E DaqBook/2000E
DaqSubTypeDaqBook2001 DaqBook/2001
DaqSubTypeDaqBook2020 DaqBook/2020
DaqSubTypeDaqBook2005 DaqBook/2005
DaqSubTypeDaqLab2001 DaqLab/2001
DaqSubTypeDaqLab2005 DaqLab/2005
DaqSubTypeDaqScan2001 DaqScan/2001
DaqSubTypeDaqScan2002 DaqScan/2002
DaqSubTypeDaqScan2004 DaqScan/2004
DaqSubTypeDaqScan2005 DaqScan/2005
DaqSubTypeWaveBook516A WaveBook/516A
DaqSubTypeWaveBook516E WaveBook/516E
DaqSubTypeZonicBook618 ZonicBook/618
DaqSubTypeDaqBoard2000 DaqBoard/2000
DaqSubTypeDaqTemp7A DaqTemp/7A
DaqSubTypeDaqBoard2001 DaqBoard/2001
DaqSubTypeDaqTemp14A DaqTemp/14A
DaqSubTypeDaqBoard2005 DaqBoard/2005
DaqSubTypeDaqTemp7 DaqTemp/7
DaqSubTypeDaqTemp14 DaqTemp/14
DaqSubTypeDaqBoard3000USB
DaqBoard/3000USB
DaqSubTypeDaqBoard3001USB DaqBoard/3001USB
DaqSubTypeDaqBoard3005USB DaqBoard/3005USB
DaqSubTypeDaqBoard3006USB DaqBoard/3006USB
DaqSubTypePersonalDaq3000 PersonalDaq/3000
DaqSubTypePersonalDaq3001 PersonalDaq/3001
DaqSubTypePersonalDaq3005 PersonalDaq/3005
DaqSubTypePersonalDaq3006 PersonalDaq/3006
Returns
DerrNoError No error
Function Usage
The daqGetInfo function retrieves specific information for the device specified by the handle parameter. The
device must have been opened previously to calling daqGetInfo by the daqOpen function. The values returned
vary in data type. If it is not specified by the whichInfo table in the “Parameter Type Definitions” section above,
the returned data type remains the same as the type it was originally set as.
When the whichInfo parameter is set to DdiHardwareVersionInfo, the result is the same as using the
daqGetHardwareInfo
function.
The daqGetInfo function should be used instead of daqGetHardwareInfo.
Prototypes
C/C++
daqGetInfo(DaqHandleT handle, DWORD chan, DaqInfo whichInfo, VOID *info);
Visual BASIC
VBdaqGetInfo&(ByVal handle&, ByVal chan&, ByVal whichInfo&, info As Any)
Program References
None