Measurement Computing Data Acquisition Systems rev.10.4 - Manual (Page 337)

Programmer’s Manual 958293 Custom OEM Installation C-1
Custom OEM Installation C
This appendix consists of two parts. Both outline the procedures required for custom reseller hardware and driver installation
and distribution; and both include the names of driver files and their locations.
o Part 1 applies to USB devices operating under a Windows 2000 or Windows XP operating system.
o Part 2 applies to non-USB devices operating under a Windows 9x, Me operating system, or under a
Windows NT/2000/XP system, with device exceptions as noted.
Part 1 – USB Devices Operating under Windows 2000 or XP
Applies to:
Personal Daq/3000 Series devices
DaqBoard/3000USB Series devices
The following files are required for installation by OEM.
PDaq3K.inf (requested when the hardware is detected)
DaqClIn.dll
DaqCoIn.dll
PDaq3KLD.sys
PDaq3K.sys
DaqX.dll
File Installation is automated for the Personal Daq/3000 and DaqBoard/3000USB
Series devices on plug-and-play operating systems.