IHSE USA 480 Series Draco tera enterprise - Manual (Page 86)

Draco tera
86
2013-08-14
5.4.4 Switch
The configuration of the switching parameters is set in this menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
activated The user can switch to any CPU as an
observer, even to such ones that are
already assigned to another user
(observer without keyboard/mouse
access).

Note: Switching with the key
, not .
 The operator will not be informed if
further users connect as an
observer to the CPU that is
connected to his console.
Video Sharing
deactivated Function not active (default)
activated
The user can connect to every single
CPU as an operator, even to such ones
that are related to another user.

Note: The previous user is set to
video only status.
 To share K/M control, Force
Connect has to be activated.
Force Connect
deactivated Function not active (default)
activated
Extension of Force Connect: If the user
connects to a CPU as an operator that is
already related to another user, the
connection to the previous user will be
completely disconnected.
Note: To share K/M control Force
Disconnect has to be deactivated. Force
Disconnect
deactivated Function not active (default)