IHSE USA 480 Series Draco tera enterprise - Manual (Page 169)

Operation
2013-08-14
169
In order to disconnect existing connection between CON and CPU devices
proceed as follows:
1. Click on the port that has to be disconnected by using the right mouse
button.
2. Select the function Disconnect in the appearing popup. The
connected ports will be immediately disconnected. At the same time
all further connections of the extenders assigned to the involved
devices will be disconnected.
Pos: 105 /806-IHSE/Betrieb/480_CON Switch/480_CON Switch @ 9\mod_1375172364133_6.doc @ 79232 @ 2 @ 4
6.4 CON Switch
KVM extender CON Units connected to a local source (computer, CPU)
can be locally switched via the matrix. Switching is performed between the
local source and the KVM connection and can be executed via 'Hot Keys'
or via OSD.
If you switch to the local source, the KVM connection will be automatically
disconnected.
You have the following possibility to switch to the local source: