IHSE USA 480 Series Draco tera enterprise - Manual (Page 163)

Operation
2013-08-14
163
Example view Selection list CPU Devices
Activating the automatical Scan Mode for CPU Devices
The matrix offers the possibility to use a scan mode based on the favorite
list of each console or user. The scan mode allows the matrix to switch in
sequence between the CPU Devices in the favorite list within a predefined
time. All scans are performed in video only mode.
For a configuration of the scan mode, Chapter 5.8.1, Page 115.
You have the following possibility to activate the scan mode:
In order to activate the scan mode, proceed as follows:
1. Define a favorite list for the respective CON Device or user (see
Chapter 5.8.4, Page 126 for CON Devices or see Chapter 5.5.2,
Page 100 for users)
2. Start Command Mode with the 'Hot Key' and press to open OSD.
3. Select in the CPU selection list one of the CPU Devices that are
defined in your favorite list.