IHSE USA 480 Series Draco tera enterprise - Manual (Page 46)

Draco tera
46
2013-08-14
4 Installation
Pos: 34 /806-IHSE/Installation/Lieferumfang prüfen/480-xx @ 7\mod_1309935842774_6.doc @ 52736 @ 2 @ 1
4.1 Package Contents
Your package contains the following items:
 Draco tera matrix
 1x power cord per built-in power supply unit
 1x serial control cable
 Mounting accessories
 Quick Setup
 Java Tool
 1x Cat X network cable (cross-wired)
If anything is missing, contact your dealer.
Pos: 35 /806-IHSE/Installation/System anschließen/480-xx @ 7\mod_1309935998118_6.doc @ 52754 @ 2 @ 1
4.2 System Setup
First time users are recommended to setup the system in the same room
as a test setup. This will allow you to identify and solve any cabling
problems, and experiment with your system more conveniently.
Setup of the matrix
1. Install the CPU and I/O boards.
2. Connect keyboard, mouse and monitor to the CPU board of the
matrix.
3. Connect the matrix to the power supply.
4. Open OSD via 'Hot Key' and login with administrator rights in the
main menu under configuration (see Chapter 5.2.1, Page 55).
5. Configure initially as requested.
After the configuration of the system it is recommended to save the
configuration by selecting Configuration > Save and restart the matrix by
selecting Restart Matrix.
6. Optional: Establish a network connection between the matrix and the
Java tool in order to set an extended configuration (see Chapter
5.2.2, Page 60).