IHSE USA 480 Series Draco tera enterprise - Manual (Page 41)

Description
2013-08-14
41
OSD
In order to activate the SNMP agent, proceed as follows:
1. Select Configuration > SNMP in the main menu.
Menu Configuration – SNMP
2. Set the option Enable to Y (Yes) under SNMP Agent. By activating
this option, the permission for an active query of the SNMP agent is
granted.
In order to configure a SNMP server, proceed as follows:
1. Select Configuration > SNMP in the main menu.
2. Set the option Enable Traps to Y (Yes) within SNMP Server. This
function allows an active transmission of trap messages from the
SNMP agent to the SNMP server.
3. Set the IP address of the SNMP server within Server Address.
4. Activate the requested traps by enabling them to Y (Yes).